Safety
Always observe the following precautions to reduce the risk of injury and equipment damage:
The S1800e series devices are for indoor use only.
Do not connect the S1800e series devices to any cabling (BNC,HDMI, PoE or otherwise) that
runs outdoor.
The S1800e series devices should be placed on a secure flat surface or mounted using optional
hardware.
The S1800e series devices should only be operated in a clean, dry environment.
For the multiport encoders, the operating temperature is 32ºF to 131ºF (0ºC to 55ºC), with
maximum humidity at 95% non-condensing.
For single and dual port devices except the S1801e-POE, the the operating temperature is 32ºF
to 140ºF (0ºC to 60ºC), with maximum humidity at 95% non-condensing.
For the single port S1801e-POE, the operating temperature is 32ºF to 131ºF (0ºC to 55ºC), with
maximum humidity at 95% non-condensing.
Only use the recommend power cable for powering the S1800e series devices.
Do not install the S1800e series devices in an enclosed cabinet or other small area without
ventilation.
Verint Video Intelligence Solutions
7
To Next Page
Loading...
