Verint Nextiva S1808e-A - Setting Audio Output Properties; Setting Audio Decoder Properties

Setting the Audio Output Properties
The S1801e, S1802e, S1808e-A and S1816e-A supports bi-directional audio: audio input and
output. The audio output properties allow you to set the Gain to increase the amplitude of the input
signal.
► Perform the following steps:
1. Start the Web Interface.
2. From the tree, select Configuration >Audio.
3. Select the Output Properties tab.
4. From the Gain box, type a value from -12 to 59 to set the amplitude of the signal from the input
to the output.
5. Click the speaker icon to mute audio for the output.
6. Click Apply.
Setting the Audio Decoder Properties
The S1801e, S1802e, S1808e-A and S1816e-A supports bi-directional audio: audio input and
output. Audio output allows you to capture audio signals from a camera, provided that it supports
audio, at the same time it captures video.
► Perform the following steps:
1. Start the Web Interface.
2. From the tree, select Configuration >Audio.
Audio Properties
95
www.verint.com/video_solutions