3. Select the Decoder Properties tab.
4. From the Compression Mode list, select one of the following:
PCM
μ-LAW
5. Click Apply.
Activating Nextiva Onboard Analytics
Nextiva Onboard Analytics is a licensed feature available on the multiport S1800e series encoders
(S1808e, S1808e-A, S1816e and S1816e-A)and supports up to four video inputs (1, 2, 5, and 6 on
the S1808e and S1808e-A) and (1, 2, 9, and 10 on the S1816e and S1816e-A).
NOTE: Nextiva Onboard Analytics is not available on the S1816e-SP and S1816e-SR models.
Contact your Verint sales representative on obtaining a license.
CAUTION: Once you activate Nextiva Onboard Analytics for a single input, MPEG-4 compression
mode is disabled for the whole device.
Verint recommends that you activate the Nextiva Onboard Analytics license prior to adding the
multiport S1800e series encoder to Nextiva VMS. If the multiport S1800e series encoder is already
added to Nextiva VMS, you must manually remove all instances of MPEG-4 compression mode for
the recording and the live.
► Perform the following steps:
1. Start the Web Interface.
2. From the tree, select Administration >Licensing.
Chapter 5: Using the Web Interface for Configuration
Verint Video Intelligence Solutions
96
To Next Page
Loading...
Need help?
General
