Package Contents
Each installation kit contains the following:
One S1808e, S1808e-A, S1816e, S1816e-A, S1816e-SP or S1816e-SR device
One set of rack-mount brackets with four screws (Philips M3 × 6mm pan head)
One Nextiva S1800e series Quick Installation Guide
Optional Accessories
You can order the following power supplies when purchasing the multiport encoders:
PS1261: Efficiency level V compliant power supply for S1800e series multiport devices.
PS1281: 19-inch rack mountable power supply for up to ten multiport devices.
PS1282-10: 19-inch rack mountable power supply for up to 10 - S1800e series multiport
devices.
PS1282-20: 19-inch rack mountable power supply for up to 20 - S1800e series multiport
devices.
PDP10-2: 19-inch 1U power distribution panel rack mount to connect up to ten S1800e series
devices
Installing on a Flat Surface
This section explains how to install the S1800e on a desktop or flat surface.
► Perform the following steps:
1. Remove any debris and dust from the surface as well as the surrounding area.
2. Place the device on the flat surface.
3. Ensure that you have access to both the front and rear of the device and that the fan airflow is
not blocked.
Installing in a Rack
This section explains how to install the device in a rack.
► Perform the following steps:
1. Align the mounting brackets with the holes on the side of the S1800e series device.
Package Contents
42
www.verint.com/video_solutions
To Next Page
Loading...
Need help?
General
