4. In the tree view, click Unit >Video >Input.
5. For each video settings, move the slider to the left or right to change the setting.
Brightness:Changing the brightness level allows you to increase or decrease highlights
and shadows, making them darker or lighter. The values range from -128 to 127.
Contrast:This refers to the difference between the lightest and darkest parts of the image.
The values range from -128 to 127.
Hue: This refers to the color classification given to the image based on the colors found in
the color spectrum. The values range from -128 to 127.
Saturation:This refers to the intensity of the colors in the image. The values range from -
128 to 127.
6. Click OK.
7. Click Exit.
Setting the SNMP Properties
Simple Network Management Protocol (SNMP) is a protocol used by network management
systems to manage network equipments from a central location. The S1800e devices are SNMP-
compliant and store data about themselves in Management Information Bases (MIBs) and return
this data (SNMP Traps) to the SNMP requesters.
► Perform the following steps:
1. Start SConfigurator.
2. Select the Units tab, then click Discover.
Chapter 4: Using SConfigurator for Configuration
Verint Video Intelligence Solutions
66
To Next Page
Loading...
