Supported Decoding Resolution and Tile Layout
The following table lists the displayed video resolutions supported by the S1801e-R and S1801e-R-
HD decoders. The monitor used must support one of these resolutions.
NOTE: The S1801e-R decoder is available in two models with different connector types (BNC and
HDMI). For the HDMI model, HDTV standard is used, which is independent of NTSC/PAL
standards.
Resolution NTSC PAL Frames per Second
CIF 352 × 240 352 × 288 30
2CIF 704 × 240 704 × 288 30
4CIF 704 × 480 704 × 576 30
D1 720 × 480 720 × 576 30
640×480p60
a
640 × 480 60
480p60a 720 × 480 60
576p50a 720 × 576 50
HD720p50/60a 1280 × 720 50/60
b
HD1080i50/60a 1920 × 1080 50/60b
Supported Tile Layout
The following table lists the supported video decoding resolution on each tile by each mode on the
S1801e-R and S1801e-R-HD.
Tiles
1 2 3 4 5 6
Single CIF
2CIF
4CIF
D1
<= 2 Megapixel
c
None None None None None
Quad CIF
2CIF
CIF
2CIF
CIF
2CIF
CIF
2CIF
None None
a
Applies only to the HDMI decoder.
b
Field per second
c
Only Supported on the HDMI Decoder.
Frame Rate and Performance for the Single- and Dual-Port Devices
23
www.verint.com/video_solutions
To Next Page
Loading...
Need help?
General
