Verint S1801e User Manual

Quick Installation Guide
for Single/Dual-Port Devices
S1800e Series
Version 2.0
Nextiva
1
This installation guide provides instructions for installing and performing the initial configuration. All users
should read the user manuals for complete details on installation, usage and functionality.
Contents of the Package
 One S1801e, S1801e-POE or S1802e video encoder or One S1801e-R or S1801e-R-HD video decoder
 One Nextiva S1800e Series Quick Installation Guide
 PS121: ENERGY STAR
®
qualified power supply for Nextiva S1800e series single and dual port devices
except the S1801e-POE.
Optional Accessories
 VRM8: 19-inch rack mount panel for eight Nextiva S1800e series single and dual port devices.
 PSPOE: 802.3af compliant Power over Ethernet injector.
Hardware Overview
The Nextiva S1800e series single/dual-port devices are available in five models: S1801e, S1801e-POE,
S1801e-R, S1801e-R-HD or S1802e.
Nextiva S1800e Series Single/Dual-Port Front View
Video Out Audio
In Out
In Out
Audio
Audio
AudioVideo In
Video In 1 Video In 2
In
Out
In Out
S1801e or S1801e-POE
S1802e
S1801e-R
S1801e-R-HD
Video Input
Video Output
HDMI Output
HD Video Out

Verint S1801e Specifications

General

Brand	Verint
Model	S1801e
Category	Media Converter
Language	English

Summary

Contents of the Package

Optional Accessories

Lists optional accessories for the Nextiva S1800e series devices.

Hardware Overview

Installing the Nextiva S1800e Series Device

Installing on a Flat Surface

Instructions for placing the Nextiva S1800e series device on a desktop or flat surface.

Installing on a Rack

Steps for mounting the Nextiva S1800e series device within a rack cabinet.

Connecting the Nextiva S1800e Series Device

Connecting Power Wiring

Details on how to connect the power supply wires to the device terminal block.

Connecting Video Output Cables for Decoders

How to connect BNC or HDMI cables to the S1801e-R or S1801e-R-HD decoders.

Powering S1801e-POE via Ethernet Injector

Instructions for using a PSPOE injector to power the S1801e-POE device.

Connecting Video and Network Cables for Encoders

Guide to connecting video cables to analog cameras and network cables to encoders.

Obtaining the IP Address

Connecting the Audio Cable

How to connect audio cables from a source to the device's audio input.

Obtaining IP Address of the Device

Steps to get the Nextiva S1800e series device IP address using SConfigurator.

Configuring Audio Settings

Setting the IP Address Manually

Procedure for manually configuring the IP address, subnet mask, and gateway.

Configuring Audio for Encoders/Decoders

Guide to setting audio parameters like input type, compression, and gain using SConfigurator.