Verint S1802e User Manual

Quick Installation Guide
for Single/Dual-Port Devices
S1800e Series
Version 2.0
Nextiva
1
This installation guide provides instructions for installing and performing the initial configuration. All users
should read the user manuals for complete details on installation, usage and functionality.
Contents of the Package
 One S1801e, S1801e-POE or S1802e video encoder or One S1801e-R or S1801e-R-HD video decoder
 One Nextiva S1800e Series Quick Installation Guide
 PS121: ENERGY STAR
®
qualified power supply for Nextiva S1800e series single and dual port devices
except the S1801e-POE.
Optional Accessories
 VRM8: 19-inch rack mount panel for eight Nextiva S1800e series single and dual port devices.
 PSPOE: 802.3af compliant Power over Ethernet injector.
Hardware Overview
The Nextiva S1800e series single/dual-port devices are available in five models: S1801e, S1801e-POE,
S1801e-R, S1801e-R-HD or S1802e.
Nextiva S1800e Series Single/Dual-Port Front View
Video Out Audio
In Out
In Out
Audio
Audio
AudioVideo In
Video In 1 Video In 2
In
Out
In Out
S1801e or S1801e-POE
S1802e
S1801e-R
S1801e-R-HD
Video Input
Video Output
HDMI Output
HD Video Out

Verint S1802e Specifications

General

Brand	Verint
Model	S1802e
Category	Media Converter
Language	English

Summary

Hardware Overview

Front View of Single/Dual-Port Devices

Details the front panel connectors and indicators for Nextiva S1800e single/dual-port devices.

Rear View of Single/Dual-Port Devices

Details the rear panel connectors, slots, and ports for Nextiva S1800e single/dual-port devices.

Device Installation

Flat Surface Installation

Instructions for placing the Nextiva S1800e device on a flat surface, ensuring accessibility.

Rack Mount Installation

Steps for mounting the Nextiva S1800e device into a rack using the VRM8 panel.

Device Connectivity

Power Wiring Connections

Guides on connecting the power supply to the device's terminal block, emphasizing polarity.

PoE Powering for S1801e-POE

Procedure for powering the S1801e-POE via a PoE injector or switch.

Video Output Connections for Decoders

How to connect BNC or HDMI cables for video output from S1801e-R and S1801e-R-HD decoders.

Video and Network Connections for Encoders

Instructions for connecting analog cameras and network cables to the encoders.

Audio Cable Connection

Details on connecting audio sources to the device's audio input connectors.

IP Address Configuration

Obtaining Device IP Address

Explains how to find the device's IP address using DHCP or SConfigurator.

Manual IP Address Configuration

Steps to manually assign an IP address, subnet mask, and gateway to the device.

Audio Configuration

Configuring Audio Settings

Guide to setting audio sampling rate, input type, compression, and gain levels using SConfigurator.