Multiport Supported Frame Rates
The following table lists the performance that each video encoder on the S1800e series encoders
can achieve with the H.264 compression mode using single-stream encoding. For other encoding
values, refer to the Nextiva Edge Devices Stream Performance document, available on the Verint
extranet: https://online.verint.com/.
NTSC PAL
Resolution S1808e and
S1816e
a
S1816e-SP and
S1816e-SR
S1808e and
S1816e
S1816e-SP and S1816e-
SR
Single
H.264
Dual
H.264
Single H.264 Dual H.264
CIF 30 fps 30 fps 30 fps 25 fps 25 fps 25 fps
2CIF 30 fps 30 fps 30 fps 25 fps 25 fps 25 fps
4CIF 30 fps 15 fps N/A 25 fps 12.5 fps N/A
D1 30 fps 15 fps N/A 25 fps 12.5 fps N/A
Supported Audio Formats
The S1801e, S1802e, S1808e-A, S1816e-A, S1801e-R and S1801e-R-HD supports bi-directional
audio: audio input and output. Audio input allows you to capture audio signals from a camera,
provided that it supports audio, at the same time it captures video.
Currently, the S1800e series devices support the following audio formats:
Codec Sampling Frequency Bits per Sample Bitrate
PCM (no compression) 8 kHz 16 bits/data 28 kbits/sec (8kHz)
G.711/μ-Law (8 bits) 8 kHz 14 bits signed/data 64 kbits/sec
NOTE: The S1816e-SR and S1816e-SR do not support audio.
Understanding the LED Indicators
The S1800e series devices have two types of tri-colored (red-orange-green) LEDs: One system
status LED and either 1, 8 or 16 video status LEDs depending on the model.
a
includes the audio models
Multiport Supported Frame Rates
25
www.verint.com/video_solutions
To Next Page
Loading...
Need help?
General
