Verizon E3200 - Page 11

11
 / INTRODUCTION
verizon.com/fios | ©2019 Verizon. All Rights Reserved
• Reset Button - allows you to reset your Fios Business Wi-Fi
Extender to the factory default settings. To perform a soft
reboot, press and hold the button for at least three seconds. To
reset your Fios Business Wi-Fi Extender to the factory default
settings, press and hold the button for at least ten seconds.
• Power - connects your Fios Business Wi-Fi Extender to an
electrical wall outlet using the supplied power adapter.
Warning: The included power adapter is for oce use only,
supporting voltages from 105-125 voltage in AC. Do not use in
environments with greater than 125 voltage in AC.
1.3c/ MOUNTING THE FIOS BUSINESS WIFI EXTENDER TO A
WALL
For optimum performance, the Fios Business Wi-Fi Extender is
designed to stand in a vertical upright position. Verizon does not
recommend wall mounting the Fios Business Wi-Fi Extender.
However, if you wish to mount your Fios Business Wi-Fi Extender,
you can purchase a wall mount bracket from the Verizon Fios
Accessories Store at
verizon.com/smallbusiness/accessories/all-accessories/fios
To mount your Fios Business Wi-Fi Extender to a wall:
1. You may use the wall-mount template sheet for positioning
the Fios Business Wi-Fi Extender.