Verizon Wireless Hotspot Setup – Ellipsis 900L/LS
Step 1 Insert Battery into Jetpack
Slide back cover off jetpack and insert battery.
Be sure that the battery contacts line up with
contacts of device.
Step 2 Power on your Jetpack
Press and hold the Power/Menu button for 2-
3 seconds and wait for the green light to turn
on. Note: Make sure your Jetpack is charged by
plugging in the cord in the charging port.
Step 3 Connecting to your Jetpack
Your Wi-Fi Name (SSID) and Password can be
found on your Jetpack display upon initial power
up.
You can also find your Wi-Fi Name and Password
any time you need. Just press the power/menu
button when the display is on.
Step 4 Connecting to the Internet
1. Open your device’s Settings application.
2. Click on the Wi-Fi option to view the available
networks around you.
3. Find your Jetpack’s Wi-Fi name, titled “Ellipsis
Jetpack xxxx”
4. Click Connect and enter the Password when
prompted
Need Help?
Call 800-922-0204 for assistance setting up your Jetpack device.
To Next Page
Need help?
General
