Verizon One Talk T46G User Manual

PREVIOUS | CONTENTS | NEXT
4On e Tal k—T46G and T46GW desk phone user guide
Startup and initialization
When your One Talk phone is connected to the
network and powered on, it will automatically start the
initialization process. The phone will attempt to contact
a Dynamic Host Configuration Protocol (DHCP) server
in your network to obtain valid IPv4 network settings by
default. After connecting, the power light will start as a
steady red light, then blink and turn o when
initialization is complete.
After startup, and confirming the 911 address, the
phone will be ready for use.
View E911 address.
Emergency 911 (E911) is a location technology that
enables emergency responders to know the
geographical location of a caller dialing 911.
To view your 911 address, press the 911 Address line
key to the right of the LCD screen.
Welcome
The Verizon T46G and T46GW IP desk phones are
stationary Voice-over-IP (VoIP) business phones that
support One Talk
SM
from Verizon features with up to 22
programmable line buttons. They come with a 4.3-inch
color display and 10 multipurpose line key buttons. The
T46G supports optional Wi-Fi for wireless connection
and Bluetooth® for hands-free calling. The T46GW
ships with the Wi-Fi adapter included.
Most importantly, both models support the Verizon One
Talk service. So, wherever you are—at your desk or on
the move—you never have to miss a call.
Initial setup
If your T46G desk phone is not already connected and
set up for using the Verizon One Talk service, please
verify the following with your system administrator
before proceeding:
1. You have a One Talk number.
2. Your user information has been updated in the One
Talk Admin portal with your 911 address and email
address.
3. Your phone number has been included in any
business group features.
4. Preferred options for broadband and power
connections.
Connect to broadband and power.
Power
You have two options for broadband and power
connections. Your system administrator will advise you
on which one to use.
Network
Connect the included standard Ethernet cable (or other
standard Ethernet cable) between the internet port on
the phone and the port on the wall or on your Power
over Ethernet (PoE)-capable switch/hub device.
Wi-Fi connectivity (optional)
As an alternative to wired Ethernet connection,
the T46G desk phone can also connect to the
network wirelessly with the optional WF40 Wi-Fi
USB dongle. The T46GW ships with a Wi-Fi adapter
already installed.
For setup instructions, please refer to Wi-Fi
connectivity in the “Basic settings” section of this
user guide.

Verizon One Talk T46G Specifications

General

Brand	Verizon
Model	One Talk T46G
Category	Telephone
Language	English