92
To transfer Pictures/Sounds to a paired Bluetooth
device
1. When a Bluetooth device is paired with your phone,
highlight it in the Bluetooth menu and press the Right
Soft Key [Options] to display the pop-up menu.
2. Select Send Pictures/Sounds Via Bluetooth and
press the OK Key.
3. You can mark the desired picture(s) in My Pictures or
sound file(s) in My Sounds by pressing the OK Key
[MARK] and when finished, press the Left Soft Key
[Done] and then send them to the paired device.
In the pop-up menu, you can also select the following
options:
Select Remove Device and press the OK Key, then
select Yes and press the OK Key to remove the paired
device from the list.
Select Remove All Devices and press the OK Key,
then select Yes and press the OK Key to remove all
paired devices.
Select Rename Device and press the OK Key to
rename the paired device name. Modify the name in
the Enter New Name field and press the OK Key [SET]
to confirm.
Select Incoming Security and press the OK Key.
Select Always Ask or Always Connect and press
the OK Key [SET].
Select Service Discovery and press the OK Key to
view the supported Bluetooth services of the paired
device.
To Next Page