96
1. Slide the phone up and press the OK Key [MENU]→
Settings & Tools→Tools→Voice Commands to
access the function.
Shortcut: Press and hold the CLR/Voice Commands
Key to access the function.
2. The phone displays the Voice Commands menu and
prompts you to say the following name of the command
you want to use. To complete your task, simply follow
the voice prompts.
y Call <Name or #>
To make a call, say “Call” and the command system
will prompt you for the name or phone number. You
can state the name and number type of the contact
(for example, “Call John Work”) to access the
contact’s phone number directly.
When using the Call command, speak clearly and
say the name exactly as it is entered in our contact
list.
y Send <MSG Type >
To create a message, say “Send” and the command
system will prompt you for the type of message.
After choosing the message type, you will be
prompted for the contact name, number or group.
You can say a full-sentence command, which
states the message type and the name or number
of the contact (for example, “Send Text Message
to Bob Smith”), and the voice command system
will automatically start a text message. If the name
has more than one number, the system will prompt
you for the number type.
To Next Page
Loading...
