How to Attach the Lanyard or Keychain Accessory
A lanyard and a keychain are included in the USB760 Modem package. These accessories provide convenient
portability while on the go.
IMPORTANT: Do not wear the lanyard and the USB760 Modem around rotating or machinery or during
sleep. An emergency release clip is constructed in the design, however you may also cut through the
material.
To affix the lanyard or the keychain to the USB760 Modem
1. Locate the accessory hook on the device and the protective cap.
2. Pinch the looped thread on the lanyard or keychain and feed through the accessory hook in the
protective cap.
3. Pinch the looped thread on the lanyard or keychain and insert into the accessory hook hole until it exits
through the other side.
4. Insert the end of the Lanyard and the protective cap through the loop and pull to tighten.
To Next Page
Loading...
Need help?
General
