To Next PageTo Next Page
Need help?Do you have a question about the Verlinde EUROBLOC VT2 and is the answer not in the manual?
Lists precautions for safe maintenance procedures.
Details the lockout-tagout procedure for personnel protection.
Details periodic inspections and maintenance tasks.
Defines servicing intervals based on SWP% and calendar months.
Describes hoisting machinery subassemblies and provides disassembly warnings.
Details rope drum construction, maintenance tasks, and wear inspection.
Describes hoisting gearbox, lubricant, and replacement of sealing sets.
Describes hoisting motors, their types, and maintenance for those with encoders.
Describes the hoisting brake as an electromagnetic safety brake and its replacement.
Details maintenance tasks for the second brake, including disc checks and replacement.
Explains drum brake construction, holding brake, and overspeed brake functions.
Details hoisting limit switch construction and maintenance tasks.
Details maintenance for rope sheaves, including wear inspection.
Explains wire rope structure, types, maintenance, and discard criteria.
Illustrates hook block construction and maintenance for various frame sizes and reeving.
Explains overload protection mechanisms, maintenance, and operation tests.
General| Protection Class | IP55 |
|---|---|
| Control Type | Pendant control or radio control |
| Weight | Varies depending on model and configuration |
| Motor | Thermally protected |
| Operating Voltage | 400V / 50Hz (other voltages available) |
| Net Weight | Varies depending on model and configuration |
