©2015 Green Manufacturing, Inc. 1
Vermeer SC252 & SC292
Upgrade Wheel Assembly
If you have any questions or concerns, please call 1-800-473-3683
BEFORE YOU BEGIN
Read these instructions completely and
carefully
Note to installer – Be sure to leave
these instructions for the consumer’s use
Note to consumer – Keep these
instructions with your Owner’s Manual for
future reference
Skill level – Installation of the wheel
requires intermediate mechanical skills.
Proper installation is the responsibility of the
installer. Product failure due to improper
installation is not covered under any
warranty
IMPORTANT - Before you continue,
please check the packing list to make sure it
matches the contents of the boxes.
Disconnect Power
to machine to prevent any machine
components from moving before proceeding.
Failure to do so could result in death or
serious injury.
FOR YOUR SAFETY read and
observe all CAUTIONS and
WARNINGS shown throughout
these instructions. While
performing the installations that
are described in this booklet, gloves
& safety glasses or goggles should
be worn at all times.
To Next Page
Need help?
General
