- Page 4 -
Getting Started
Unpacking
All VERMONA devices are checked and tested carefully before packaging. In spite of the specially designed
cartons and the solid build quality of the devices, damages during transportation are possible. Please check the
unit after receipt for visible damage.
Please do not discard the original packing! Use it for shipping the unit again, should this be necessary.
Inventory
The VERMONA Retroverb comes complete with:
• The VERMONA Retroverb
• AC 12V / 830mA power supply
• This manual
Please ensure all the items above are included. If something is missing contact your local dealer.
Connections
• Connect the outputs of your signal source (i.e. synthesizer, guitar, etc.) with the inputs of the
RETROVERB.
• Connect the outputs of the Retroverb with the inputs of your mixing console, amplifier, etc.
• Connect the included power supply to the 12V AC jack of the Retroverb and an outlet.
• Switch on the Retroverb.
Use the Retroverb only with the included power supply 12V AC / 830 mA.
Before connecting and disconnecting the Retroverb to a power supply, turn your amps volume all the way down to
avoid damage due to on/off switching noises!
To Next Page
Loading...
