How to fix battery icon on LCD on Vermont Castings Stove transmitter?
If you see a battery icon on the LCD of your Vermont Castings Stove transmitter, it likely indicates a low battery. Replace the batteries, ideally every 6 months. Also, ensure the batteries are correctly installed. If the issue persists, try pressing the reset button on the back of the transmitter.
Why is the LCD display blank on my Vermont Castings Stove?
If the LCD display on your Vermont Castings Stove is blank, the first step is to replace the batteries, and it's recommended to do this every 6 months. Then, check the battery installation to ensure they are correctly placed. If the screen remains blank, press the reset button on the back of the transmitter.
What to do if blower is not on after the Vermont Castings Stove is turned on?
If the blower on your Vermont Castings Stove isn't working after turning on the stove, ensure the blower setting isn't off by pressing the FAN key to select your desired fan speed. Also, check the blower delay setting by pressing and holding the Fan key to set the desired ON/OFF delays in minutes.
Why does my Vermont Castings Stove LCD display show a “funny” display?
If the LCD display on your Vermont Castings Stove shows a 'funny' display, it is likely due to low battery. To resolve this, replace the batteries, and consider changing them every 6 months. Also, check the battery installation. As a last resort, press the reset button located at the back of the transmitter.
General| Brand | Vermont Castings |
|---|---|
| Model | RFSDV34 |
| Category | Indoor Fireplace |
| Language | English |
To Next Page
