Vermont Castings Signature Series VCS325SSBI Series User Manual

VCS325SSBI Series and VCS525SSBI Series
Assembly Procedures
Tools Required: Knife or scissors, Phillips or Robertson (square head) screwdriver.
CAUTION: This grill is intended ONLY to be built into an enclosure.
CAUTION: The assembly of this grill requires two (2) people.
30007230 10/14 Rev. 1 En
Model VCS525SSBI Shown
WARNING: Some parts may have sharp edges; to avoid injury, wearing gloves during assem-
bly, lifting or moving the grill is recommended. Protective eyewear and long sleeves are also
strongly recommended.

Vermont Castings Signature Series VCS325SSBI Series Specifications

General

Brand	Vermont Castings
Model	Signature Series VCS325SSBI Series
Category	Grill
Language	English

Summary

Assembly Procedures

Unpack Carton and Verify Contents

Instructions for unpacking the grill components and verifying all parts are present.

Assemble Brackets

Attaching the left and right brackets to the main grill unit using provided hardware.

Assemble the Rear Panel

Securing the rear panel to the grill base and side brackets with self-tapping screws.

Assemble Grease Tray Front and Handle

Attaching the grease tray front and handle to the grease tray using bolts and nuts.

Install Backlighting Batteries and Battery Case

Installing eight AA batteries into the battery case and connecting it to the holder bracket.

Assemble Grill Unit to Enclosure

Positioning the assembled grill unit into its prepared enclosure and checking gas connections.

Install Internal Components

Placing sear plates, cooking grates, and warming rack into the grill interior.

Framing Dimensions: Noncombustible Materials

Framing Dimensions: Combustible Materials