Vermont Castings WinterWarm Fireplace Insert or System User Manual

Homeowner’s
Installation and
Operating Manual
SAFETY NOTICE: IF THIS APPLIANCE IS NOT PROPERLY INSTALLED, OPERATED AND MAIN-
TAINED, A HOUSE FIRE MAY RESULT.
TO REDUCE THE RISK OF FIRE, FOLLOW THE INSTALLATION INSTRUCTIONS. FAILURE TO
FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN
DEATH. CONTACT LOCAL BUILDING OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION
INSPECTION REQUIREMENTS IN YOUR AREA.
Do Not Discard This Manual: Retain for Future Use
2000941 1/06 Rev. 15
WinterWarm
Fireplace Insert
or System
For Use in North America
0941
Winter Warm Cover
3/01

Vermont Castings WinterWarm Fireplace Insert or System Specifications

General

Brand	Vermont Castings
Model	WinterWarm Fireplace Insert or System
Category	Indoor Fireplace
Language	English

Summary

Specifications

Operation

WinterWarm Controls

Explains the primary air, damper, and fan controls of the WinterWarm.

Building and Managing a Fire

Maintenance

Surface Care and Cleaning

Damper and Combustor Care

Instructions for adjusting the damper and inspecting/maintaining the catalytic combustor.

Chimney System Inspection and Safety

Guidance on inspecting the chimney, preventing creosote, and handling chimney fires.

Maintenance Schedule

Preparing a Masonry Chimney

Fireplace and Chimney Requirements

Ensures fireplace and chimney meet code, size, and condition standards.

Dimensions, Clearances, and Hearth Protection

Specifies fireplace dimensions, clearances, and hearth protection needs.

Chimney Connection and Sealing

Details requirements for chimney connectors and flue sealing methods like Flex Connector.

Installation Preparation Steps

Installing the Fireplace System Cabinet

Building Codes, Location, and Chase

Addresses local codes, location selection, and chase construction.

Chimney, Ducting, and Hearth Requirements

Hearth Installation and Floor Protection

Finishing the Installation

Cabinet Preparation and Installation

Firechamber (Insert) Installation

Control and Air Kit Installation

Final Assembly and Trim