VERSA QUICKTALK GO SERVICE MANUAL
12
8. Features
8.1 Voice Prompt
- You could set a voice prompt in English using PC programming software.
- Voice prompting when selecting channel.
8.2 Jacklight
- Mini flashlight between Channel and Power knob.
7.3 CTCSS/DCS
- Reduces the interference by adding a low frequency.
7.4 Channel Scan
- Scan Channel 1 to 16.
7.5 Time-Out-Timer (TOT)
- Limit the transmission period 0 to 600 seconds.
7.6 Low Power Alarm
- Audio prompt when the battery is low.
7.7 Squelch Level Adjustment
- Adjust the receiver sensitivity.
7.8 High/Low Power Selection
- Adjust the output power of the radio to 1W or 2.5W.
7.9 Dual Watch Operation
- Scan channel 16 and 1 selected channel.
To Next Page
Loading...
