VERSARE MP10 - Attach End Panels

Unfold outside panel from top of panel stack and secure fi rst end panel with 2 Screws
through remaining holes of each End Panel Plate. (Velcro closures of end panel should be
facing towards the bundle) Repeat to secure other end of end panel.
Carefully turn stack over so panels are positioned vertically on end, resting on the fi rst
attached end panel.
+
+
+
+
+
+
+
+
+
+
8.
Attach End Panels
+
+
+
+
+
+
+
+
+
+
+
+
+
+
Set fi nal end panel on top of vertical stack, end panel plate pointing down. Using 4 Screws,
secure the fi nal end panel, 2 screws for each End Panel Plate.
4