VERSARE Room Divider - Step 6: Insert 7;16 Bolt; Step 7: Locate Rectangular Nut; Step 8: Insert ½” Bolt; Step 9: Tighten All Bolts

Versare Portable Products 3306 5
th
street NE Minneapolis, MN 55418
Phone: 800-833-7570 Fax: 800-833-8032 WWW.PortablePartitions.com
Room Divider Assembly Instructions
Step #6: Insert 7/16” bolt as shown, top
and bottom.
Step #8: Insert ½” bolt into rectangular
nut, top and bottom of partition.
Step #9: Tighten all bolts.
Step #10: Rotate partition assembly
so it rests on the back of the end
panel.
Step #7: Locate rectangular nut and
slide up channel and align with last
open hole.
Step #11: Place second end panel on
partition assembly as shown.