VERSARE Room Divider - Step 12: Insert 9;16 Bolt (Top); Step 13: Insert 7;16 Bolt (Top); Step 14: Insert ½” Bolt (Nut); Step 15: Tighten All Bolts (Final)

Versare Portable Products 3306 5
th
street NE Minneapolis, MN 55418
Phone: 800-833-7570 Fax: 800-833-8032 WWW.PortablePartitions.com
Room Divider Assembly Instructions
Step #12: Insert 9/16” bolt in top hole as
shown, top and bottom.
Step #14: Insert ½” bolt into rectangular
nut, top and bottom.
Step #15: Tighten all bolts.
Step #16: Clasp transport lock as
shown.
Step #13: Insert 7/16” bolt as shown,
top and bottom.
Step #17: Carefully lift partition in the
upright position.