4
Operating Manual Reprint
right, and their functions are explained on page 8.
For further details, contact your
dealer. For future reference,
check the box next to each function that has been
assigned to the Soft key and Toggle Switch on your
particular radio, and keep it handy.
Description of Operating Functions
Channel Scan
The Scanning feature is used to monitor multiple signals
programmed into the transceiver. While scanning, the trans-
ceiver will check each channel for the presence of a signal,
and will stop on a channel if a signal is present.
One key or switch may be assigned to the Scan function, as
follows:
One of the Soft keys may be assigned for Scan opera-
tion; or
The Toggle switch may have one position assigned to
the Scan function.
To activate scanning:
z Press the assigned Soft key, or set the Toggle switch to
the assigned position.
z The scanner will search the channels, looking for active
ones; it will pause each time it finds a channel on which
someone is speaking.
To stop scanning:
z Press the assigned Soft key, or set the Toggle switch to
a different position.
z Operation will revert to the channel to which the CH
knob is set.
*
requires DTMF/Encryption Unit
None
Channel Scan
Dual Watch
High/Low Power
Talk Around
TX Save Disable
LCD Invert
Encryption Disable*
Follow-Me DW
Call/Reset*
Speed Dial*
Emergency*
Group Up
Group Down
Channel Up
Channel Down
Monitor
Lamp
ABCD
Soft Key
Functions
None
Channel Scan
Dual Watch
High/Low Power
Talk Around
TX Save Disable
LCD Invert
Encryption Disable*
Follow-Me DW
Call/Reset*
Speed Dial*
Emergency*
Group Up
Group Down
Channel Up
Channel Down
Monitor
Lamp
SEL2 MON
LAMP
SEL1
Soft Key
Functions
Toggle Switch (Position)
AB
None
Channel Scan
Dual Watch
High/Low Power
Talk Around
TX Save Disable
LCD Invert
Encryption Disable*
Lock
Follow-Me Scan
Group recall Shortcut
Functions
center
Group 1
Group 2
Group 3
Group 1
Group 2
Group 3
Group 1
Group 2
Group 3
*
requires DTMF/Encryption Unit
*
requires DTMF/Encryption Unit
To Next Page
Loading...
Need help?
General
