Vertex Standard VX-800 User Manual

Operating Manual
VX-800
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
VERTEX STANDARD
US Headquarters
17210 Edwards Rd., Cerritos, CA 90703, U.S.A.
International Division
8350 N.W. 52nd Terrace, Suite 201, Miami, FL 33166, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
YAESU GERMANY GmbH
Am Kronberger Hang 2, D-65824 Schwalbach, Germany
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong

Vertex Standard VX-800 Specifications

General

Channel Spacing	12.5 / 20 / 25 kHz
IP Rating	IP54
Operating Temperature	-30°C to +60°C
Frequency Range	134-174 MHz (VHF), 400-470 MHz (UHF)
Power Output	5W (VHF) / 4W (UHF)
Battery	Li-Ion 7.4V

Summary

CONTROLS & CONNECTORS

BEFORE YOU BEGIN

Battery Pack Installation and Removal

Instructions for installing and removing the battery pack from the transceiver.

OPERATION

Preliminary Steps

Essential setup steps to prepare the transceiver for initial operation.

Operation Quick Start

A simplified guide to quickly power on and begin using the VX-800 radio.

ADVANCED OPERATION

Soft Key and Toggle Switch Functions

Customizable functions for soft keys and toggle switches, enabling personalized radio operation.

Channel Scan

Using the scanning feature to automatically monitor multiple programmed channels for signals.

Dual Watch

Encryption Disable

Channel Group Selection

Emergency

Activating the emergency feature for critical situations and monitoring on a specific frequency.

ARTS (Auto Range Transpond System)