To Next PageTo Next Page
Need help?Do you have a question about the Vertex Standard VX-4000 Series and is the answer not in the manual?
General| Brand | Vertex Standard |
|---|---|
| Model | VX-4000 Series |
| Category | Two-Way Radio |
| Language | English |
Details antenna placement requirements for FCC RF exposure compliance.
Turns the transceiver ON and OFF.
Red lamp indicates when the radio is transmitting.
Green lamp indicates when the channel is busy.
Shows channel names, status, and error messages.
Connects the microphone plug to the transceiver.
Connects the 50-ohm coaxial feedline to the antenna.
Connects an external loudspeaker.
Connects the supplied 13.8-V DC power cable.
DSUB 25-Pin connector for external audio and control signals.
Procedure for turning the transceiver ON and OFF.
Adjusting the receiver audio volume level.
Steps for transmitting audio over the selected channel.
How to navigate between channel groups and individual channels.
Manages transmission duration to prevent continuous keying.
Details customizable functions assigned to PF buttons.
Monitoring multiple channels for activity.
Monitoring the current channel and a priority channel.
System for indicating proximity to other ARTS-equipped stations.
Detailed explanations of various functions programmable to PF buttons.
Cancels signaling squelch and unmutes audio.
Selects the last called channel.
Selects a 2-Tone for communication.
Switches audio output between front panel and body speakers.
Manually adjusts the squelch sensitivity level.
Toggles the Voice Scrambler feature ON or OFF.
