To Next PageTo Next Page
Need help?Do you have a question about the Vertex Standard VX-264 and is the answer not in the manual?
General| Brand | Vertex Standard |
|---|---|
| Model | VX-264 |
| Category | Two-Way Radio |
| Language | English |
Ensuring the radio does not interfere with other devices or systems during transmission.
Instructions for attaching and detaching the battery pack from the transceiver.
Procedure for charging the battery pack using the desktop charger.
How the radio indicates a low battery level and what to do.
Steps to install and remove the belt clip accessory.
Procedure for installing the microphone/speaker cap.
Initial setup actions before operating the transceiver.
Basic steps to power on and select a channel on the transceiver.
How to adjust volume and set squelch level for optimal audio.
Instructions for transmitting and receiving calls using the PTT button.
How to activate pre-programmed functions using the programmable keys.
Explanation of the automatic time-out feature for transmissions.
How the radio handles busy channels or tones during transmission.
Details on how programmable keys can be customized for various functions.
Manually adjusting the squelch level for optimal reception.
Temporarily disabling or enabling radio beep notifications.
Increasing microphone gain for low-voice transmissions.
Activating hands-free transmission using voice input.
Manually adjusting the VOX Gain level for voice activation.
Preventing VOX activation from receive audio or alert tones.
Initiating an emergency call for alerting other parties.
Activating a feature that emits an alarm if no user interaction occurs.
Selecting different channel groups on the transceiver.
Selecting different channels within the current group.
Recalling the pre-programmed Priority Channel.
Monitoring multiple channels for activity.
Monitoring channels across multiple groups.
Configuring Group Scan to include multiple groups.
Monitoring two channels simultaneously (current and priority).
Scanning a user-assigned priority channel along with programmed scan list.
Adding or deleting channels from the scanning list.
Searching transmit and receive frequencies on duplex systems.
Bypassing repeater to talk directly to nearby stations.
Resetting the transceiver to Ready for Communication condition.
Sending pre-programmed 5-Tone call signals.
Selecting 2-Tone or 5-Tone encode codes.
Setting the digits for 5-Tone encode codes.
Dialing pre-programmed Auto-Dial telephone numbers.
Sending pre-programmed 2-Tone encode codes.
Toggling the Duty function for 2-Tone or 5-Tone paging.
Disabling the Transmit Battery Saver for consistent high power.
Locking controls to prevent accidental changes or transmissions.
