Vertex Standard VX-264 - Group Up;Down; Channel Up;Down; Priority Channel (PRI); Scanning Channels

VX-264 Operating Manual
21
grouP uP/doWn
Press,(orpressandhold),theassigned
PF
keytoselecta
differentgroupof channels.Agroup numberwillappear
at the upper right corner and a group name will appear
brieyonthedisplay.
channel uP/doWn
Press,(orpressandhold),theassigned
PF
keytoselecta
differentchannel.Achannelnamewillappearonthedis-
play.
Pri
Press,(or pressand hold),the assigned
PF
key torecall
thepre-programmedPriorityChannelofthecurrentgroup
by yourVertex Standard dealer directly. When Priority
Channelis recalled,the“
P
”icon willappearon thedis-
play.
scan
The Scanning feature is used to monitor multiple chan-
nelsprogrammedintothetransceiver.Whenscanning,the
transceiverwillcheckeachchannelforthepresenceofa
signalandwillstoponachannelifasignalispresent.
To activate scanning:
r
 Press,(orpressandhold),theassigned
PF
keytoacti-
vatescanmode.
r
 The scanner will search the channels of the pre-
programmedscanlist,lookinganactivechannel.The
radiowillpauseeachtimeitndsachannelonwhich
someoneisspeaking.
r
 Pressagain,(orpressandholdagain),theassigned
PF

keytodisablescanningandreceivethechannelwhich
waschosenwhenpressedthe
PF
key.
Note:Your dealer may have programmed your radio to
stay on one of the following channels if you press the
PTT
switchduringscanningpause:

“ScanPause”channel(“TalkBack”)

“LastBusy”channel

“Priority”channel

“UserProgrammed”channel(“SelectChannel”)


The channel which defined in the
CH
 Selector
knob(“ChannelPosition”).
adVanced oPeration