Vertex Standard VX-264 - Group Scan; Group Scan Set; Dual Watch

22
VX-264 Operating Manual
adVanced oPeration
grouP scan
Group Scan monitors channels in multiple groups, com-
pared to the scan feature, which monitors channels in a
single or current group.When scanning, the transceiver
willcheckeachchanneloftheprogrammedgroupforthe
presenceofthesignalandwillstoponachannelifasig-
nalispresent.
Press,(orpressandhold),theassigned
PF
keytoactivate
groupscanforthepre-programmedgroups.
Press again, (or press and hold again), the assigned
PF

key todisable group scanmode and receivethechannel
whichwaschosenwhenpressedthe
PF
key.
When the Group Scan isactivated, the display indicates
“”.
grouP scan set
YoumaywishtohavetheScannerpassthroughmorethan
one Group during the scanning process (normally, scan-
ningisperformedwithinthecurrentgrouponly).
ToincludethecurrentGroupinthescanningloop,press,
(orpressandhold),theassigned
PF
key:asmalldot(“

”)
willappear atthe bottomofthedisplay(See page11 of
thismanual).
Toremove a current Groupfrom Group Scan,press,(or
press and hold), the assigned
PF
 key again: asmall dot
(“

”)willdisappearfromthedisplay.
dual Watch
The DualWatch feature is similar to the SCAN feature,
exceptthatonlytwochannelsaremonitored:

 Thecurrentoperatingchannel

 ThePrioritychannel.
To activate Dual Watch:
r
 Press,(orpressandhold),theassigned
PF
keytoacti-
vatetheDualWatchfeature.
r
 The scanner will search the two channels and pause
whenitndsatransmissiononeitherchannel.
 When the Dual Watch feature is activated, the
“ ”iconwill beindicated onthedisplay(See page
11ofthismanual).
To stop Dual Watch:
r
 Press,(orpressandhold),theassigned
PF
keytodis-
abletheDualWatchfeature.
 The radio reverts back to the original channel being
monitoredbeforethedualwatchfeaturewasinitiated.