Vertex Standard VX-264 - Duty Function; TX Save Disable; Lock Controls

26
VX-264 Operating Manual
dutY
Press,(orpressandhold),theassigned
PF
keytotoggle
theDutyfunctionofthe2-Toneor5-Tone“On”and“Off”.
Whenthe Dutyfunctionis setto“On”,the displayindi-
cates “ ” briefly and the user will always hear
(depending on thesub-audio signaling) all trafc on the
paging channel.The radio will sound the paging alert
whenitreceivestheprogrammed2-Toneor5-Tone.
When the Duty function is set to “Off”, the display in-
dicates “” briey and theuser will NOT hear
normalradiotrafconthepagingchannel.Theradiowill
soundthepagingalertandunmuteonlywhenitreceives
theprogrammed2-Toneor5-Tone.
tx saVe disable
The Transmit Battery Saver helps extend battery life by
reducingtransmit powerwhen avery strongsignal from
an apparently nearby station is being received. Caution
is advised when using this feature, as your transmission
powercoulddegradetheaudioheardbythereceivingra-
diosinyourcommunicationpath.
Press,(orpressandhold),theassigned
PF
keytodisable
theTransmitBatterySaver,ifyouareoperatinginaloca-
tionwherehighpowerisalmostalwaysneeded.
Press again, (or press and hold again), the assigned
PF

key, theTransmit Battery Saver activates to reduce the
transmitpowerwhenaverystrongsignalfromanappar-
entlynearbystationisbeingreceived.
When theTransmit Battery Saver is “on” and “off”, the
displayindicates“”and“”briey.
locK
Press(orpressandhold)theassigned
PF
keytolockthe
CH
Selectorknob,Programmablekeys,and
PTT
switch.
adVanced oPeration