What to do if red transmit LED turns on when connecting CT-96 headset cable to Vertex Standard VXA-220?
If the red transmit LED on your Vertex Standard Transceiver turns on and the radio becomes inoperable when connecting the CT-96 headset cable, ensure that the connector on the CT-96 headset cable is screwed into the MIC/EAR jack. Simply pushing the connector in is not sufficient to establish proper contact within the radio.
General| Brand | Vertex Standard |
|---|---|
| Model | VXA-220 |
| Category | Transceiver |
| Language | English |
Details FCC RF exposure compliance requirements for occupational use.
Description of the SMA jack for antenna connection.
Overview of primary, secondary, and third functions of the keypad.
Function of the MONITOR switch for squelch control.
Details on how to activate different key functions.
Explanation of icons like DW, ANL, SPL, SKIP, VOX, etc.
Important warnings about handling and use of the transceiver.
Step-by-step guide for charging the Ni-MH battery pack.
How the low battery indicator appears and its meaning.
Steps to quickly turn on the radio and select a frequency.
Methods for selecting operating frequencies using keys and DIAL.
How to quickly access the emergency frequency.
Storing and recalling channels from memory.
How to access and scan weather channels.
Activating and deactivating the ANL feature for noise reduction.
Preventing accidental changes to settings with the lock function.
Configuring the battery saver for reduced power consumption.
How to enable or disable the key/button beeper.
Procedure to change synthesizer channel steps (8.33/25 kHz).
Using voice activation for transmit/receive switching.
Monitoring your transmitted voice from the headset.
Using the Stop Watch and Count Down timers.
Steps to store frequencies into main memory channels.
How to access and retrieve stored memory channels.
Procedure for clearing memory channels.
Configuring channels to be skipped during scanning.
How to mark channels to be skipped during scan.
How to activate the Dual Watch feature.
Activating the enhanced Priority Dual Watch feature.
Setting a separate transmit frequency for split operation.
How to turn on and use the split frequency function.
Storing channels and labels into Book Memory.
Steps to reset the microprocessor to factory defaults.
How to access and change settings in the menu.
Adjusting the squelch level.
Selecting between Dual Watch and Priority Watch modes.
Controlling the emergency channel key function.
Enabling or disabling the VOX operation.
List of accessories included with the transceiver.
Resolving problems with headset cable connections.
Details on frequency range, spacing, voltage, and consumption.
Information on transmitter power, frequency stability, and modulation.
Specifications for adjacent channel selectivity and audio output.
To Next Page
