To Next PageTo Next Page
Need help?Do you have a question about the Vertex Standard VX-110 and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Channel Capacity | 16 Channels |
| Power Output | 5W |
| Battery Life | Up to 12 hours |
| Dimensions | 130 x 58 x 34 mm |
| Weight | 300 g |
| Mode | FM |
| Voltage | 7.2 V |
| Supply Voltage | 7.2 V |
Procedure for installing the battery pack and antenna.
Covers power, volume, squelch, and transmitting procedures.
Details tuning methods, power selection, and channel steps.
Explains repeater shifts, offset, and keyboard lock features.
Configures receive/transmit battery savers and keypad/LCD illumination.
Covers APO, BCLO, LED disabling, battery check, beeper, and tone calling.
Details TOT, ANI, CTCSS, DCS, and tone search scanning.
Configures a bell alert for incoming decoded CTCSS/DCS calls.
Covers storing, recalling, and managing memory channels and odd splits.
Explains storing and recalling the HOME channel and labeling memories.
Details masking memories for selective display and using Memory Only mode.
Sets scan resume techniques and covers VFO and Memory scanning.
Includes skipping channels, scan lamp, band edge beeper, and Smart Search.
Explains how to use the Dual Watch feature for priority channel monitoring.
Covers storing, programming, and sending DTMF numbers and codes.
Basic activation and operation of the Automatic Range Transponder System.
Customizes polling intervals, alert beeps, and CW identifier.
Restores all factory defaults and erases all memory data.
Resets only Set mode parameters to factory defaults.
Procedure for transferring memory and configuration data between transceivers.
Configure memory tags, repeater shifts, and synthesizer steps.
Adjust scan resume, battery savers, and power-off features.
Manage CTCSS/DCS, DTMF, ANI, and other system controls.
