To Next PageTo Next Page
Need help?Do you have a question about the Vertex Standard VX-1700 and is the answer not in the manual?
General| Brand | Vertex Standard |
|---|---|
| Model | VX-1700 |
| Category | Transceiver |
| Language | English |
Important safety and warning information for operation and installation.
Detailed explanation of front panel buttons, knobs, display, and speaker.
Explains primary and secondary functions of keypad keys.
Description of rear panel connectors for power, antenna, GPS, data, tuner, and audio.
Safety guidelines for installation, including power, grounding, and electrical shock prevention.
Precautions for antenna placement, grounding, and lightning protection.
Guidelines for ensuring adequate ventilation and preventing overheating.
Information on minimizing interference and RF exposure concerns.
Steps for visually inspecting the transceiver upon unpacking.
Instructions for connecting the DC power supply for mobile and base station use.
Instructions for mounting the transceiver in a vehicle.
Guidance on selecting and connecting mobile antennas and tuners.
Methods for grounding the transceiver in mobile installations.
Details for connecting the FP-1030A AC Power Supply for base station use.
Guidance on selecting and positioning base station antennas for optimal performance.
Recommended grounding practices for base station installations.
Procedures for transmitting voice, CW, and data signals.
Steps for using the antenna tuner and retuning when necessary.
How to receive signals, adjust volume, squelch, and use noise blanker.
How to lock and unlock front panel controls to prevent accidental changes.
Activating and de-activating the encryption mode for secure communication.
Making individual/group calls using assigned IDs.
Step-by-step guide for initiating a Selcall.
How the transceiver responds to an incoming Selcall.
Sending and receiving text messages to/from other stations.
Instructions for composing and sending a message.
How the transceiver handles incoming messages.
Requesting location information from another station.
Procedure to request a station's position.
How the transceiver responds to a position request.
Sending your own location information to another station.
Procedure to send your current position.
How the transceiver handles receiving position data.
Inquiring about signal quality before a call.
Procedure to request a beacon signal quality check.
Making telephone calls via an interconnect service.
Procedure to initiate a telephone call.
Initiating an Automatic Link Establishment call.
Sending an ALE call with an attached text message.
Recalling channels and activating features like Dual Watch.
Adjusting receive frequency up or down without changing transmit frequency.
Toggling the Encryption feature on and off.
Toggling the Key Lockout feature on and off.
Activating the Priority Scan feature.
Activating scanning.
Turning the internal or external speaker on and off.
Selecting the transmit power output level.
Toggling the VOX feature on and off.
Toggling the Automatic Link Establishment feature on and off.
Transmitting a Selcall or ALE while in respective modes.
Disabling squelch to hear background noise.
Recalling the last-received Selcall or ALE Message.
Toggling the SELCALL feature on and off.
Transmitting a Telcall while operating in Selcall mode.
Toggling the optional accessory port "3" on and off.
Setting the optional accessory port "2" to "High".
Setting the optional accessory port "1" to "Low".
