To Next PageTo Next Page
Need help?Do you have a question about the Vertex Standard VX-4200 Series and is the answer not in the manual?
General| Brand | Vertex Standard |
|---|---|
| Model | VX-4200 Series |
| Category | Transceiver |
| Language | English |
Information regarding safe usage, antenna gain limits, and operating duty factor.
Guidelines for installing antennas for safe operation and compliance with RF exposure requirements.
Overview of the radio's front panel controls, including VOL Knob, Microphone Jack, and Programmable Function Buttons.
Description of the radio's rear panel connectors, including DC input, antenna socket, and accessory ports.
Procedure for turning the transceiver power on and off.
Instructions on how to adjust the audio volume using the VOL knob.
Guidelines for transmitting, including channel monitoring and PTT switch usage.
Explanation of the timer limiting transmission length to prevent continuous keying.
How to activate and deactivate the key lock feature to prevent accidental operations.
Explanation of how PF buttons can be customized for various functions.
Function to cancel CTCSS/DCS squelch and unmute audio.
How to manually adjust the squelch level.
How to select the brightness level of the display and key backlight.
How to select a different channel within the current group.
How to select different groups and manage scanning across groups.
Feature for monitoring multiple programmed channels.
How the Dual Watch feature monitors two channels, the current and priority.
Scan feature that checks a User-assigned Priority Channel regularly.
Dual Watch setup using the Follow-Me feature for frequency pairing.
How to switch to low power mode to extend battery life.
Feature to bypass repeater stations and talk directly to nearby stations.
How to toggle voice encryption on and off when the Voice Scrambler is enabled.
Initiating an emergency call.
Feature to change the 3-digit Page Call code for selective calling.
How to send a predefined 5-Tone sequential burst.
How to select a 5-Tone encode code from a predefined list.
How to change the 5-Tone encoding digit.
How to select a 5-Tone status code from a predefined list.
How to change the 5-Tone status code.
How to check the 5-Tone receive status code.
How to dial pre-programmed Auto-Dial telephone numbers.
How to recall the pre-defined Home group/channel.
How to select a sub-audible tone (CTCSS/DCS).
How to turn the Horn Alert function on or off.
How to use the transceiver as a Public Address amplifier.
How to toggle output port on "1" on and off.
How to toggle output port on "2" on and off.
How to recall Dealer pre-programmed channels directly.
Function for recording and playback of incoming audio with optional Voice Storage Unit.
How to reduce the audio output to the lower level programmed by your Dealer.
How to activate the "User Set" (Menu) Mode for configuring settings.
Explains how to access and configure various radio settings via the User Set Menu.
System to inform when within communication range of another ARTS-equipped station.
System for paging and selective calling using DTMF tone sequences.
