Vertex Standard VX-150 - User Manual

YAESU MUSEN CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
YAESU U.S.A.
17210 Edwards Rd., Cerritos, CA 90703, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525 1118 ZN, Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
YAESU GERMANY GmbH
Am Kronberger Hang 2, D-65824 Schwalbach, Germany
YAESU HK LTD.
11th Floor Tsim Sha Tsui Centre, 66 Mody Rd.,
Tsim Sha Tsui East, Kowloon, Hong Kong
OPERATING MANUAL

Summary

Basic Operation of the VX-150

Battery Pack and Antenna Installation

Procedures for installing the battery pack and antenna.

Power, Volume, Squelch, and Transmitting

Basic operation including power, volume, squelch, and transmitting.

Repeater Offset and Keyboard Locking

Setting repeater Tx offset and activating keyboard locking features.

Advanced Operation of the VX-150

VFO Split Mode and Battery Savers

Using VFO split and configuring battery saver features.

Power Management and Key Functions

Configuring APO, battery savers, LEDs, and key functions.

Tone, DCS, ANI, and Scan Settings

Memory Operation and Management

Memory Storage, Recall, and Tuning

Scanning Features and Modes

Scan Resume and VFO Scanning

Memory Scanning and Smart Search

ARTS Operation and CW Identifier

ARTS Setup and CW Identifier

Interface, Resetting, and Troubleshooting

Microprocessor and Set Mode Resetting

Cloning Radio Data

Radio Data Cloning Procedure

Vertex Standard VX-150 Specifications

General

Power Output	5W
Modulation	16K0F3E (FM)
Operating Temperature	-20°C to +60°C
Supply voltage	7.2 V DC
Channel Capacity	16 channels