To Next PageTo Next Page
Need help?Do you have a question about the Vertex Standard VX-1210 and is the answer not in the manual?
General| Type | Mobile |
|---|---|
| Channel Capacity | 128 |
| Mode | FM |
| Voltage | 13.8 V DC |
| Battery | N/A (Requires external power) |
Turns the radio on by rotating clockwise and off by counterclockwise rotation.
Selects memory channels or tunes operating frequency using a 12-position rotary switch.
Adjusts the audio volume level; clockwise rotation increases volume.
Offsets receiving frequency by up to 200/400 Hz to compensate for drifting signals.
Terminal for earth ground connection to improve performance and safety.
Accepts a 50 Ohm antenna, supporting specific optional antenna tuners and whips.
Customizable switches whose functions are assigned by a dealer.
Displays the current operating channel information.
Indicates transceiver status: green for busy/squelch off, yellow for transmit, red for battery issues.
Press to transmit and release to receive.
This switch is not activated in this transceiver.
Connects an earphone for improved listening in noisy conditions.
Location of the loudspeaker for the MH-50B7A microphone.
Speak across this opening while pressing the PTT switch.
Reduces the output level from the MH-50B7A's loudspeaker.
Houses the Lithium-Ion Battery Pack.
4-pin jack for connection to the optional CD-17 Charger.
9-pin DB-9 jack for AFSK input/output and CW keying.
Instructions for installing and removing the battery pack from the transceiver.
Procedure for charging the battery pack using the CD-17 charger.
Steps to prepare the transceiver for use, including battery and accessories.
Instructions for connecting and tuning the whip antenna.
Basic steps to turn on, select channel, adjust volume, and transmit.
Overview of customizable toggle switch functions available for the transceiver.
Enables/disables optional Selcall Unit for paging and selective calling.
Selects transmitter power output between High or Low for battery life.
Enables/disables the IF Noise Blanker to reduce manmade impulse noise.
Enables/disables the Automatic Antenna Tuner.
Initiates antenna tuning by pressing the assigned TOGGLE switch.
Enables/disables the optional voice encryption unit.
Controls illumination of the LCD lamp.
Selects display format: channel frequency or alphanumeric label.
Activates a loud alarm sound for alerting group members to danger.
Selects frequency control between VFO and Memory Systems.
Enables/disables TELCALL for Autopatch dialing.
Controls receiver quietness until a signal is received or manually opens squelch.
Switches audio output between internal speaker or optional microphone.
Allows paging and selective calling using 4-digit FSK codes.
Enables easy TELCALL operation for Autopatch dialing.
Details frequency range, emission modes, impedance, temperature, and power requirements.
Lists power output, modulation type, spurious radiation, and other transmitter characteristics.
Specifies circuit type, intermediate frequencies, sensitivity, and selectivity.
Lists accessories included with the transceiver.
Lists optional accessories that can be purchased for the transceiver.
