Vertex Standard VX-1210 User Manual

4 VX-1210 OPERATING MANUAL
PTT Switch
Press this switch to transmit, and release it to
receive.
Dummy Switch
This switch is not activated in this transceiver.
EAR Jack
You may connect an Earphone to this jack,
for improved listening under noisy conditions.
Earphone operation requires that the MH-
50B7A’s loudspeaker be enabled via program-
ming by your Vertex Standard dealer.
When a plug is installed into this jack, the MH-
50B7A’s internal loudspeaker will be disabled.
Note: The protective rubber cover over the
jack must be pulled up to access the jack. Press
it back over the jack when does not in use, to
protect the inside of the microphone from dust and water.
Speaker
The loudspeaker for the MH-50B7A is located here.
Microphone
Speak across this opening in a normal voice level while pressing the PTT switch.
Speaker Volume Button
Press this switch to reduce the output level from the MH-50B7A’s loudspeaker, if the
MH-50B7A’s loudspeaker has been enabled (via programming by your Vertex Stan-
dard dealer).
MH-50B7A Switches

Vertex Standard VX-1210 Specifications

General

Brand	Vertex Standard
Model	VX-1210
Category	Transceiver
Language	English