VX-1210 OPERATING MANUAL 3
TOGGLE Switches
These TOGGLE switches can be customized, via programming by your Vertex Stan-
dard Dealer. The available features for these switches are described on page 11.
LCD (Liquid Crystal Display)
The current operating channel is displayed here.
LED Indicator
This LED indicates the current status of the transceiver.
Glowing Green: Busy Receive Channel (or Squelch off).
Glowing Yellow: Transmission in progress.
Blinking Yellow: Antenna mismatching problem (High SWR condition).
Blinking Red: Battery voltage is nearing depletion. Prepare to replace the battery.
Glowing Red: Battery voltage is critically low. Replace the battery immediately.
Front Panel Control and Switches
To Next Page
