6 VX-1210 OPERATING MANUAL
Operation
BEFORE YOU BEGIN
BATTERY PACK INSTALLATION AND REMOVAL
To install the Battery Pack, insert the
Battery Pack into the battery compart-
ment on the bottom of the radio, then
secure the Battery Pack using the
Latch Clip on the Battery Pack.
To remove the Battery Pack, turn the
radio off and remove any protective
cases, then unlatch the clip from the
Battery Pack. Place your thumbs on
the edge of the Battery pack, then slide
out the Battery Pack from the radio
while applying light pressure onto it.
Do not attempt to open the Re-
chargeable Battery Pack, as per-
sonal injury or damage to the pack could
occur if a cell or cells become accidentally
short-circuited.
Install
Remove
To Next Page
Loading...
Need help?
General
