PWC – 500/1000/1010/1500
PureWaterCooler
Copyright 2006 Vertex Water Products
13. Trouble Shooting
(Water dispenses from spigot but is not cold)
Possible causes
Solution .
1. Cooler not plugged in Make sure power cord is plugged
into wall socket
2. Power switch not on Make sure cold power switch on
the back panel is on.
3. Adjust temperature control The thermostat temperature control
adjustment is located on the back
of the cooler. (see section 9)
4. All cold water has been drained Cooler needs time to recover.
wait 10-15 minutes until water cools
Water not cold from cold tank
To Next Page
Loading...
