Need help?Do you have a question about the Vertex PWC-500 and is the answer not in the manual?
General| Type | Bottled Water Dispenser |
|---|---|
| Filtration | No |
| Color | White |
| Water Source | 5 Gallon Bottle |
| Weight | 12 kg |
| Power Consumption | 500W (Heating) |
| Material | Plastic |
| Heating Capacity | 5 Liters per Hour |
Steps for connecting the feedwater line, including opening the filter compartment and connecting tubing.
Procedures for flushing carbon fines from the filter and making the feed water connection to the cold water line.
Flushing filters, reconnecting lines, and connecting the drain saddle for RO units.
Removing the (2) screws on the back of the cooler top cover and lifting the cover.
Confirming cold tank access and noting reinstallation in reverse order.
Removing the top cover and disconnecting tubing from the float valve assembly.
Diagnosing and resolving problems with water not being cold from the cold tank.
Troubleshooting no hot water, including heating element and sensor failures.
Interpreting front panel lights to diagnose hot tank heating problems.
To Next Page
