Pairing the motor with the remote control
3
vertilux.com
© 2021. Vertilux, Ltd. All Rights Reserved. Last revised: June 2021.
1. Select the desired channel, press and hold the
up button for 3 s. Then connect the motor to the
power supply *. The motor will “jog”once.
2. Release the up button and press it again until
the motor “jogs”. Now the motor is paired with
the remote control.
UP
BUTTON
ON
UP
BUTTON
Weight capacity depending on the type of installation
Single Shaft Motor | 6-700-CL-SSE06 | 3.2 kg | 7.0 lb
*The maximum weight capacity is calculated under optimal circumstances. Actual results may vary.
Specifications are subject to change without notice.
*Power supply could be a li-ion battery charger or an external battery pack.
Day & Night Cellular Shade
Single Cellular Shade
Min. Size:
2 Drums: 0.5x3.0 m | 20x118 in
Max. Size:
3 Drums: 1.8x3.0 m | 70x118 in
Single Cellular Shade
Min. Size:
2 Drums: 0.5x3.0 m | 22x118 in
Max. Size:
4 Drums: 2.0x3.0 m | 80x118 in
Min. Size:
4 Drums: 1.0x3.0 m | 40x118 in
Max. Size:
4 Drums: 1.8x2.8 m | 70x110 in
Day & Night Cellular Shade
Min. Size:
4 Drums: 1.0x3.0 m | 40x118 in
Max. Size:
4 Drums: 2.0x2.8 cm | 80x110 in
Dual Shaft Motor | 6-700-CL-DSE08 | 3.8 kg | 8.4 lb
To Next Page
Loading...
