Need help?Do you have a question about the Vertilux VTi CELTIC and is the answer not in the manual?
Lists one-way/center open, auto-adjust limits, pull function, stop on contact, manual operation, weight capacity, and connectivity.
Steps for installing the motor into the control and pairing with the remote.
Describes checking direction, adding/deleting remotes, and factory reset options.
Details max weight for 1 Nm/2 Nm motors in one-way and center open installations.
Details max weight for 1 Nm/2 Nm motors in one-way and center open installations.
Explains RJ11 interface ports for dry contacts, RS485, and PC connectivity.
Describes operating multiple motors simultaneously via RS485 or PC.
Lists and illustrates main components like track, drive belt, and controls.
Lists components for Ripple Fold drapery systems, including carriers and snap tape.
Lists components for Pinch Pleat drapery systems, including master carriers and carriers.
Step-by-step guide to pair the motor with a remote control.
Instructions for verifying and reversing the motor's direction of movement.
Procedure for adding a new remote control or copying a channel.
Procedure to delete a programmed motor from a single channel.
Steps to disconnect a motor from all previously programmed channels.
Steps to reset the motor to its original factory settings.
General| Brand | Vertilux |
|---|---|
| Model | VTi CELTIC |
| Category | Home Automation |
| Language | English |
To Next Page
