Vertiv Liebert iCOM User Manual (English)

Other manuals for Vertiv Liebert iCOM

Questions and Answers:

K
ksanchezAug 3, 2025
What to do if I detect network settings issues with my Vertiv Liebert iCOM Control Unit?
- L
  Lisa SmithAug 3, 2025
  If you encounter network setting issues with your Vertiv Control Unit, tap the setting to bring up the on-screen keyboard and make the necessary adjustments. After making adjustments, tap 'Go'. Continue correcting until all issues are resolved. Ensure U2U communication is established, then tap 'Save'. Note that depending on the changes, the 'Save' button may indicate components needing a reboot or restart. If the control board reboots, the cooling unit will suspend operation for 60 seconds before resuming.
J
Jennifer AndersonAug 10, 2025
What to do if Vertiv Control Unit detects problems with network settings?
- D
  David ScottAug 10, 2025
  If your Vertiv Control Unit indicates network setting issues, first touch the Issues(s) button on the U2U NETWORK SETTINGS panel. Note the problems and close the dialog box. Then, touch the specific setting to correct it, make the necessary adjustments, and touch Go. Continue making corrections until no problems are indicated. Finally, verify that unit-to-unit communication is established, and then touch Save.
J
Julia HarrisonAug 17, 2025
What to do if Vertiv Controller detects problems with network settings?
- D
  Dawn HaydenAug 18, 2025
  If the Vertiv Controller detects problems with network settings, touch the specific setting displayed on the screen to correct it. The on-screen keyboard will appear, allowing you to make adjustments. After making the necessary changes, touch 'Go' to save. Continue making corrections until no further problems are indicated.

Vertiv Liebert iCOM Specifications

General

Product Type	Control Unit
Brand	Vertiv
Model	Liebert iCOM
Input Voltage	100-240 VAC
Input Frequency Range	50/60 Hz
Display	LCD
Communication Protocols	Modbus, SNMP, BACnet
Remote Management	SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity Range	5-95% RH, non-condensing
Communication Ports	Ethernet, RS-485
Dimensions	Varies by model
Weight	Varies by model