Need help?Do you have a question about the Vertiv LIEBERT PSI5 Series and is the answer not in the manual?
General| Model | LIEBERT PSI5 Series |
|---|---|
| Output Waveform | Sine wave |
| Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Form Factor | Tower |
| Operating Temperature | 0°C to 40°C |
| Power Factor | 0.9 |
| Storage Temperature | -15°C to 45°C |
| Relative Humidity | 0-95% non-condensing |
| Dimensions (HxWxD) | Varies by model |
| Weight | Varies by model |
| Type | Line Interactive |
| Battery Type | Sealed Lead Acid |
| Communication Ports | USB, RS-232 |
| Audible Noise | < 45 dBA (at 1 meter) |
| Runtime | Varies with load (typically 3-6 minutes at full load, up to 30 minutes at half load, depending on the specific model) |
| Outlets | Varies by model (typically 6-10 outlets) |
Procedures for installing the UPS unit.
Specific instructions for installing 2U and LI UPS models.
Instructions for mounting the UPS into a rack.
Instructions for installing 1U UPS models in a rack.
Instructions for installing Mini Tower (MT) UPS models.
Guidance on connecting equipment to the UPS outlets.
Instructions for connecting the UPS to AC power input.
Explains the different operating modes of the UPS.
How to adjust UPS settings using the front panel menu.
Step-by-step guide for replacing UPS internal batteries.
To Next Page
