Need help?Do you have a question about the Vertiv Liebert PSI5 and is the answer not in the manual?
General| Form Factor | Tower |
|---|---|
| Frequency | 50/60 Hz |
| Surge Protection | Yes |
| Battery Type | Sealed lead-acid (VRLA) |
| Runtime | Varies based on load and battery configuration |
| Communication Ports | USB |
| Management Software | Liebert MultiLink |
| Output Frequency | 50/60 Hz |
Lists available PSI5 models with battery types and form factors.
Illustrates and describes rear panel connectors and components for different models.
Details the buttons and display on the front panel for various PSI5 models.
Lists the components included with RT, RM, and MT models of the UPS.
Instructions for unpacking the UPS and checking for shipping damage or discrepancies.
Guidelines for selecting an appropriate installation environment and ensuring clearances.
Procedures for installing the UPS in tower or rack configurations for 2U and 1U models.
Connecting loads, network protection, USB, EPO, external batteries, and comms card.
Connecting the UPS to the AC power source, including breaker recommendations.
Explains the different operating states of the UPS, such as Off, Normal, Battery, and Fault modes.
Details the front panel buttons, LCD display, and associated icons for UPS status.
Describes audible alerts, warning codes, and fault codes with troubleshooting.
Procedures for starting, stopping, and configuring UPS settings.
Safety precautions for maintenance and guidelines for battery charging.
Step-by-step instructions for replacing internal battery packs.
Backup run times for various load levels and battery configurations.
To Next Page