Verve CAM - Reset the Camera

Reset the Camera 26
en
19. Reset the Camera
In the event that you experience a device issue or
you've forgotten the password you've set, you can
do a factory reset of your Camera using the Reset
button (located next to the microSD card slot).
To restore the camera to its factory default settings,
hold down the Reset button for 3 seconds. The 3
mode indicator LEDs will light up for about 30
seconds.
Restoring the Camera to its factory default settings
removes all data and settings you have made on the
Camera and the App installed on your smartphone.
Note that it will not erase the photos and videos you
have stored on the microSD card.
19.1 Default Settings of the Camera
Function Setting
Photo 4MP 133+- 3 degree FOV
Video 2560 x 1440 @ 30fps
Streaming
Streaming: 1280 x 720
@30fps /
Video recording: OFF
Time Lapse
Interval: 5sec / Duration:
60 mins
Loop Recording 5 mins
Connection WiFi: ON; BLE: ON