Verve CAM - App and Firmware Upgrades; Firmware Upgrade

27 App and Firmware Upgrades
en
20. App and Firmware Upgrades
20.1 App Upgrade
You can find the latest version of Hubble Connect
for VerveCam app by visiting the app store (e.g.:
iTunes App Store, Google Play
TM
). From there, you
can see what's new with the app and install the latest
version.
Occasionally, the App Server will also send you a
notification that a latest version of the app is
available. While some of the upgrades simply keep
your system running efficiently, and some are critical
to system functionality. We strongly recommend
that you complete the upgrade as soon as possible.
Software Upgrade will only be performed in Wi-Fi
®
mode.
20.2 Firmware Upgrade
The Camera is BLE-enabled and has over-the-air
firmware upgrade capability. Firmware updates will
be sent to the Camera via Hubble Connect for
VerveCam app. Please follow the app instructions
for upgrade.
Go to Settings, select Camera Settings >
Camera Information > Update Firmware.
Note:
Firmware upgrades will not be performed
automatically. You need to confirm the upgrade by
following the procedures shown on the app. Your
Camera must be connected to Wi-Fi
®
for firmware
upgrade.